+1 408-878-6810
We'll help you if

Ice maker button not working in San Jose, CA

Issue description:

The source of malfunctions leading to the breakdown of the ice maker button can be different. However, practice shows that the problems are in the electrical network.

Incorrect operation or disconnection can occur for the following reasons:

low voltage - in any network the voltage may not be powerful enough. This causes incorrect operation of the screen or provokes its malfunction and sudden voltage fluctuations - in a particularly sensitive technique, such a jump can knock out the entire electronic filling. In this case, you will have to completely replace the electronic unit and the control board is burned out - any power surges are very dangerous for sensitive electronics. They cause various components to burn out. First of all, the mentioned control board suffers. Troubleshooting, removal and replacement of the unit is carried out only by a specialist

damaged cable leading to the indicator - this is a result of poor assembly or unreasonable operation

power outlet is faulty - the reason for the screen fading may be a lack of power It will not be superfluous to check if the unit is connected to the network. You can also check the serviceability of the power cord, plug, socket and blown fuses, damaged contacts - this happens due to normal wear and tear or due to voltage surges. Repair in this case is not complicated, it is enough just to replace the damaged parts with new ones - the power button of the unit is disabled - during everyday situations, you can accidentally press the button and turn off the unit. In addition to the screen, the light inside the camera will not light up

condensation on the board - under certain circumstances, excess moisture blocks the normal operation of the scoreboard and control board

the screen is deformed due to mechanical impact - this may be the result of unsuccessful transportation or accidental shock

defect in the plume of the scoreboard - this breakdown can be easily recognized by poorly burning segments of the numbers, which significantly complicates the perception of the result. In principle, the defect does not interfere with life and does not affect the performance of the refrigerator, but it makes it difficult to adjust the temperature.

Ice maker button not working

Problem solution:

Most of the electronics, whatever one may say, crashes due to sudden power surges. Often, breakage is facilitated by moisture ingress or condensation accumulation. This occurs if the unit door is not closed securely. Regardless of which part of the board is burned out, repair is possible - this element is simply changed to a new one. Based on the diagnostic results, the board wiring can be replaced. If the cause of the breakdown lies in the screen itself, it may be necessary to replace the control board. If you need help with emergency ice maker repair, call us right now!